Apple WS 9650 Manuale Utente

 

 Troubleshooting

Symptom Charts/Problems with Jack•Hammer Ultra SCSI Card 

 

bus).

•  Shut down computer and disconnect all cables from PCI 

SCSI JackHammer card.

•  Restart computer while pressing Command-Option-J.

•  Open Control Panel folder and hold down Command key 

while double clicking on PCI SCSI JackHammer control 

panel. If diagnostic points to problem with PCI SCSI 

JackHammer card, replace JackHammer card.

Devices attached to 

JackHammer on WS 

9650 do not appear on  

bus

1 Make sure all cables are securely connected.

2 Make sure all devices are powered on.

3 Make sure JackHammer is securely seated in its slot.

4 Open PCI SCSI JackHammer Control Panel and see if 

JackHammer appears in scroll box. If not, conduct 

JackHammer self-diagnosis as follows: 

•  Load CD-ROM system disc that came with WS 9650 (or 

prepare to boot from a drive not connected to Ultra SCSI 

bus).