Blade ICE G8124-E Manuale Utente
BLADEOS 6.5.2 Application Guide
364
Chapter 26: Simple Network Management Protocol
BMD00220, October 2010
Switch Images and Configuration Files
This section describes how to use MIB calls to work with switch images and configuration files.
You can use a standard SNMP tool to perform the actions, using the MIBs listed in
You can use a standard SNMP tool to perform the actions, using the MIBs listed in
.
lists the MIBS used to perform operations associated with the Switch Image and
Configuration files.
The following SNMP actions can be performed using the MIBs listed in
.
Load a new Switch image (boot or running) from a FTP/TFTP server
Load a previously saved switch configuration from a FTP/TFTP server
Save the switch configuration to a FTP/TFTP server
Save a switch dump to a FTP/TFTP server
Table 26
MIBs for Switch Image and Configuration Files
MIB Name
MIB OID
agTransferServer
1.3.6.1.4.1872.2.5.1.1.7.1.0
agTransferImage
1.3.6.1.4.1872.2.5.1.1.7.2.0
agTransferImageFileName
1.3.6.1.4.1872.2.5.1.1.7.3.0
agTransferCfgFileName 1.3.6.1.4.1872.2.5.1.1.7.4.0
agTransferDumpFileName
1.3.6.1.4.1872.2.5.1.1.7.5.0
agTransferAction
1.3.6.1.4.1872.2.5.1.1.7.6.0
agTransferLastActionStatus 1.3.6.1.4.1872.2.5.1.1.7.7.0
agTransferUserName
1.3.6.1.4.1872.2.5.1.1.7.9.0
agTransferPassword
1.3.6.1.4.1.1872.2.5.1.1.7.10.0
agTransferTSDumpFileName
1.3.6.1.4.1.1872.2.5.1.1.7.11.0