American Power Conversion SUOL2000UXI Manuale Utente

1 990-1137, 

3/02 

Inspect the UPS upon receipt. APC designed robust packaging for your product. However, accidents 
and damage may occur during shipment. Notify the carrier and dealer if there is damage. 
The packaging is recyclable; save it for reuse or dispose of it properly. 
Check the package contents. The shipping package contains the UPS; its front bezel (packaged sepa-
rately); and a literature kit containing a software CD, one serial cable, power cords, a battery cable 
assembly, and product documentation. 

 

You must install the UPS in a protected area that is free of excessive dust and has adequate airflow. 
Ensure the air vents on the front and rear of the UPS are not blocked.  

Do not operate the UPS where the temperature and humidity are outside the specified limits. Refer to 
the Specifications at the APC web site (

www.apc.com

). 

 

 
 

Sm

a

r

Sm

a

r

Sm

a

r

 

1.  The UPS is shipped with the front bezel removed 

and packed separately within the main box. Un-
pack the bezel and hold it with the cutout section 
on top. Slide the tab on the bottom of the bezel 
into the slot on the bottom of the UPS.  Gently 
snap the top of the bezel into place.  The bezel 
can be removed by carefully unsnapping the top, 
and then sliding the bezel up and out of the tab on 
the bottom of the UPS. 

0û - 40ûC (32û - 104ûF) 
0-95% Relative 
Humidity 

2.5cm (1 in)