Emerson BACNET IP Manuale Utente

Pump Hours Threshold

Threshold value used in the [Pump Hours Exceeded] event.

Pump Hours

Operating hours for pump since last reset of this value.

RAM Battery Issue

RAM or RAM backup battery is not operating correctly.

Reheat Utilization

Present reheating utilization expressed as a percentage of the maximum rated 

capacity.

Return Fluid Temp Sensor Issue

The return fluid temperature sensor is disconnected or the signal is out of range.

Return Fluid Temperature

Fluid temperature measured at the inlet of the unit.

Server Class

The general classification for this system

Standby Units

The number of standby units.

Subgroup Event Occurred During 

Communication Loss

While subgroup unit communication was lost, an event occurred on the subgroup 

unit. Please check subgroup unit event log.

Supply Brine Temp Set Point

Desired brine fluid temperature at the outlet of the unit.

Supply Fluid Over Temp Alarm 

Threshold

Threshold value used to generate a [Supply Fluid Over Temp] alarm.

Supply Fluid Over Temp Warning 

Threshold

Threshold value used to generate a [Supply Fluid Over Temp] warning.

Supply Fluid Over Temp

[Supply Fluid Temperature] has exceeded a specified threshold.

Supply Fluid Temp Sensor Issue

The supply fluid temperature sensor is disconnected or the signal is out of range.

Supply Fluid Temp Set Point 1

Set point 1 of desired fluid temperature at the outlet of the unit.

Supply Fluid Temp Set Point 2

Set point 2 of desired fluid temperature at the outlet of the unit.

Supply Fluid Temperature

Fluid temperature measured at the outlet of the unit.

Supply Fluid Under Temp Alarm 

Threshold

Threshold value used to generate a [Supply Fluid Under Temp] alarm.

Supply Fluid Under Temp Warning 

Threshold

Threshold value used to generate a [Supply Fluid Under Temp] warning.

Supply Fluid Under Temp

[Supply Fluid Temperature] has dropped below a specified threshold.

Supply Heated Water Temp Set Point

Desired heated water temperature at the outlet of the unit.

Supply Refrigerant Temp Sensor Issue

The supply refrigeramt temperature sensor is disconnected or the signal is out of 

range.

System Control Mode

System control mode.

System Date and Time

The system date and time

System Event Acknowledge/Reset

Reset and/or acknowledge all events.

System On/Off Control

Turn system functionality on or off.

System Operating State Reason

The reason the system is in the current operating state.

System Operating State

Current operating state of the system.

System Status

The operating status for the system

Unit Code Missing

Unit code has not been entered and saved.

Unit Off

Unit was turned off.

Unit On

Unit was turned on.

Unit Shutdown Unspecified General 

Event

One or more unspecified unit shutdown events active. See local unit display for 

further details.

Unspecified General Event

One or more unspecified events active. See local unit display for further details.