Emerson M820D Manuale Utente
User Instructions
UM1M820BNA
Spec No. 1M820BNA (Model M820B)
Issue AH, March 4, 2013
Spec No. 1M820DNA (Model M820D)
Chapter 4. WEB Interface Menus
157
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
3) Select Signal or Register for Input 1.
4) Enter either the register number or choose the equipment, signal type, and signal name. The format
for entering a register is R(x), where x is the number of the register.
5)
Setup Input 2 in the same way as Input 1 if it’s not disabled.
6) Enter Param 1 and Param 2 if they are not disabled. The format for entering a parameter is P(x),
where x is the value.
7) Select Signal or Register for Output.
8) Enter either the register number or choose the equipment, signal type, and signal name.
9) Click the ADD button in the bottom of the window.
10) Reboot the ACU+. See