CyberPower Systems UP825 Manuale Utente

 

 

 

 

Batteries are not fully 
charged. 

Recharge the battery by leaving the 
UPS plugged in. 

The UPS does not 
perform expected 
runtime. 

Battery’s capacity 
diminishes over time and 
use. 

Contact CyberPower Systems at 
tech@cyberpowersystems.com 

The on/off switch is 
designed to prevent damage 
by rapidly turning it off and 
on. 

Turn the UPS off. Wait 10 seconds 
and then turn the UPS on.   

The unit is not connected to 
an AC outlet. 

The unit must be connected to a 
110/120v 60Hz outlet.     

The battery is worn out. 

Contact CyberPower Systems at 
tech@cyberpowersystems.com 

The UPS will not turn on. 
 

Mechanical problem. 

Contact CyberPower Systems at 
tech@cyberpowersystems.com 

Circuit breaker is tripped 
due to overload 

Turn the UPS off and unplug at least 
one piece of equipment. Wait 10 
seconds, reset the circuit breaker 
and then turn the UPS on. 

Batteries are discharged 

Allow the unit to recharge for at least 
4 hours. 

Outlets do not provide 
power to equipment 

Unit has been damaged by 
a surge or spike. 

Contact CyberPower Systems at 
tech@cyberpowersystems.com 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

6