Cannon 3035 Manuale Utente

Protocol Settings

Usin

g a 

TCP/IP Netw

or

k

● Using a fixed IP address:

❑

[DHCP], [RARP], and [BOOTP]: [Off]

Enter the appropriate values in [IP Address], [Subnet Mask], and [Gateway 
Address].

NOTE

 

It takes about two minutes to check whether the DHCP, BOOTP, or RARP settings 
can be used. If you do not plan to use one of these settings, it is recommended that 
you turn them off.

● Obtaining automatically an IP address:

❑

[DHCP], [RARP], or [BOOTP]: [On]

If this information cannot be obtained via DHCP, RARP, or BOOTP after you 
restart the machine, enter the IP address, subnet mask, and gateway address 
to use the settings entered in this step.

NOTE

 

•

If the machine is restarted after DHCP, BOOTP, or RARP settings are specified, the 
TCP/IP Settings screen displays the IP address setting values obtained from the 
DHCP, BOOTP, or RARP server. (If the IP address, host name, and domain name 
have been previously set, these will be overwritten by the setting values obtained 
from DHCP, BOOTP, or RARP.)

•

If you use DHCP without the DNS dynamic update function, it is recommended that 
an identical IP address be assigned to the machine at all times. (If the IP address is 
not identical, the host name for the machine will not correspond to the IP address.)

➞ 

If you do not want to set up a secondary DNS server, enter <0.0.0.0>.

Enter the name of the machine as [Host Name], and the network domain name of 
the machine as [Domain Name].