Cannon 3035 Manuale Utente

Protocol Settings

Usin

g a 

TCP/IP Netw

or

k

NOTE

 

•

You can only output a banner page if you are using the optional UFR II/PCL Printer 
Kit or the optional PS Printer Kit.

•

Output of a banner page is set on a print-job basis. Even if [On] is selected for 
<LPD Banner Page>, a banner page cannot be output for a print job unless it is set.

➞ 

Specify the Raw print settings if you are using the optional UFR II/PCL Printer Kit, 
the optional PS Printer Kit, the optional Super G3 FAX Board, or the optional 
Super G3 Multi-Line FAX Board.

[On]: You can use Raw as the print application.

If you want to establish bidirectional communication using Port 9100, press [On] 
for <Bidirectional Communication>.

➞ 

[On] for <Use SNTP>: You can perform time synchronization using SNTP.

Select the interval for performing time synchronization in <Polling Interval>.

In [NTP Server Address], enter the NTP server address or host name.