Nikon NP64 Manuale Utente
15
2. Installation and Connections
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable’s three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cable in the wall outlet.
First connect the supplied power cable’s three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cable in the wall outlet.
To wall outlet
The projector will go into standby
mode. When in standby mode, the
POWER indicator will light orange
and the STATUS indicator will light
green when [NORMAL] is selected
for [STANDBY MODE].
mode. When in standby mode, the
POWER indicator will light orange
and the STATUS indicator will light
green when [NORMAL] is selected
for [STANDBY MODE].
CAUTION:
Parts of the projector may become temporarily heated if the AC power supply is disconnected either during
normal projector operation or during cooling fan operation. Use caution when picking up the projector.
normal projector operation or during cooling fan operation. Use caution when picking up the projector.
Make sure that the prongs are fully inserted into both
the power plug and the wall outlet.
the power plug and the wall outlet.