Nikon NP64 Manuale Utente

AUTO

ADJ.

ON/STAND BY

FOCUS

LAMP
STATUS

POWER

3. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

➊

Turning on the Projector

NOTE: Before turning on the projector, first connect the supplied power cable’s three-pin plug to the AC IN of the projector, and

then connect the other plug of the supplied power cable in the wall outlet. Make sure that the projector is in its standby mode

and the power indicator is glowing orange.

1. Slide the lens cover to the right to uncover the lens.

2. Press the POWER (ON/STAND BY) button on the

projector cabinet or the POWER ON button on the
remote control for 1 second.

The POWER indicator will turn to green and the projec-

tor will become ready to use.

TIP:
* Turning on the projector will instantly cause the

AUTO FOCUS function to operate. (

→ page

)

* When the message “CONTROL PANEL LOCK IS TURNED

ON” is displayed, it means that the [CONTROL PANEL

LOCK] is turned on. (

→ page

)

After you turn on your projector, ensure that the com-

puter or video source is turned on and that the lens
cover is open.

NOTE: When no signal is available, the NEC logo (default), blue,

or black screen will be displayed. When the projector displays the

NEC logo, a blue or black screen, the projector will automatically

switch to the [ECO] mode.

The projector will return to the [NORMAL] mode once a signal

connected.

STATUS

LAMP

POWER

STATUS

LAMP

POWER

STATUS

LAMP

POWER

Standby

Preparing to

power on

Power On

Steady green/

orange light

Blinking green

light

Steady green

light

See page

for more details.

＋