NEC VE282 Manuale Utente
66
6. Maintenance
Replacing the Lamp
When the lamp reaches the end of its life, the LAMP indicator in the cabinet will blink red and the message will be
displayed. Even though the lamp may still be working, replace the lamp to maintain the optimal projector performance.
To replace the lamp, contact your NEC dealer. The lamp is not user replaceable parts.
displayed. Even though the lamp may still be working, replace the lamp to maintain the optimal projector performance.
To replace the lamp, contact your NEC dealer. The lamp is not user replaceable parts.
CAUTION
• If you continue to use the lamp after the lamp reaches the end of its life, the lamp bulb may shatter, and pieces
of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this
happens, contact your NEC dealer for lamp replacement.
happens, contact your NEC dealer for lamp replacement.
*NOTE: This message will be displayed under the following conditions:
• for one minute after the projector has been powered on
• when the
(POWER) button on the projector cabinet or the POWER OFF button on the remote control is pressed
To turn off the message, press any button on the projector cabinet or the remote control.