ADC SWD4573I1 Manuale Utente

You must specify the location from which to boot the management card image file. For an 
explanation of Avidia image files, see 

. From the 

::system=>

 prompt, type the boot command in the following format then press 

.

boot (nvram|network) [<file> [<ipaddr>]]

(nvram|network)

Specifies the location of the image file you want to boot. Options:

nvram—Boots the specified image file from the management card NVRAM.

network—Boots the specified image file from a network.

[<file>] (

This parameter is required if you set the previous parameter to network.)

The complete path and file name of the image file you want to boot, including the file name 
extension. If the image file is stored on a TFTP server in a directory other than the default 
directory, you must specify the path. See your TFTP server documentation to determine the 
required path syntax. If you do not specify the file name, the management card attempts to 
boot the available image files in the following order:

amc.new—An image file that has been downloaded from a TFTP server but has not 
yet been booted or validated. Once the file has been validated, the file name extension 
is automatically changed to .bin.

amc.bin—The image file that came preinstalled on the management card or an image 
file that was downloaded from a TFTP server and has been booted and validated by the 
management card.

amc.alt—A backup image file you can create prior to downloading a new image file.

[<ipaddr>] (

This parameter is required if you set the previous parameter to network.)

The IP address of the TFTP server on the network from which you want to boot the image 
file.

::system=> boot nvram

::system=> boot network amc.bin 10.0.0.121