ADC SWD4573I1 Manuale Utente
Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual
119
The following screen illustrates an example of both show sdsl commands.
C
ONFIGURING
SDSL C
ELL
L
INE
P
ROFILES
SDSL cell line profiles contain a preconfigured set of parameters, including the rate adaptation
mode and the transmit rate. SDSL cell port configuration requires you to apply an SDSL cell
line profile to the line, therefore you must configure the desired SDSL cell line profile before
configuring the SDSL cell port. A default profile exists with an index of 1. You cannot delete
the default profile.
mode and the transmit rate. SDSL cell port configuration requires you to apply an SDSL cell
line profile to the line, therefore you must configure the desired SDSL cell line profile before
configuring the SDSL cell port. A default profile exists with an index of 1. You cannot delete
the default profile.
You configure SDSL cell line profiles from the
::line=>
prompt. From the
::root=>
prompt, type the following command, then press
to display the
::line=>
prompt.
configuration sdsl cell profile line
Adding SDSL Cell Line Profiles
Currently, Fixed Rate is the only supported rate adaptation mode, therefore all SDSL cell line
profiles are automatically configured for Fixed Rate.
profiles are automatically configured for Fixed Rate.
From the
::line=>
prompt, type the new command in the following format then press
to create a new SDSL cell line profile.
new <rate>
::frame=> show
Line
Alarm
Admin
Port
Profile
Profile
Status
4.1
1
1
up
4.2
2
4
down
::frame=> show 4.1
Line
Alarm
Admin
Port
Profile
Profile
Status
4.1
1
1
up
ENTER
ENTER