ADC SWD4573I1 Manuale Utente

You can configure cross-connect PVCCs between cell-based channel cards and either line cards 
or the management card. You configure PVCCs from the 

::pvcc=>

 prompt. From the 

::root=>

 prompt, type the following command then press 

 to display the

::pvcc=>

 

prompt.

From the 

::pvcc=>

 prompt, do one of the following:

To add one PVCC, type the new command in the following format then press 

. The 

PVCC table index number is automatically assigned.

new <src port> <vpi> <vci> <dst port> <vpi> <vci>

[-admin (up|down)][-txtraf <src index>] [-rxtraf <src index>]

[-backup [<lport> <vpi> <vci>]]

To add multiple PVCCs with the same traffic profile, type the range command in the 
following format then press 

.

range <#pvcs> <src port> <vpi> <vci> <dst port> <vpi> <vci>

[-admin (up|down)][-txtraf <src index>] [-rxtraf <src index>]

[-y]

<#pvcs>

The number of PVCCs you want to create with the same traffic profile. See the table on 

 to verify that the ports you plan to use for the PVCCs support the number of 

PVCCs you intend to create.

<src port>

One of the PVCC ports (format slot.port). This can be either the line card or the channel 
card port.

<lport>

The other PVCC port (format slot.port). This can be either the line card or the channel card 
port.

<vpi>

The VPI associated with the preceding 

<port>

 parameter in the command line. See the 

table on 

 for a summary of the supported VPI ranges for each card.