ADC SWD4573I1 Manuale Utente

You can configure cross-connect PVCCs between frame-based channel cards and line cards or 
the management card. You configure PVCCs from the 

::pvcc=>

 prompt. From the 

::root=>

 prompt, type the following command then press 

 to display the 

::pvcc=>

prompt.

From the 

::pvcc=>

 prompt, do one of the following:

To add one PVCC, type the new command in the following format then press 

. The 

PVCC table index number is automatically assigned.

new <cport> <lport> <lvpi> <lvci> [-mode (vcmux|llc)]

[-admin (up|down)][-txtraf <index>] [-rxtraf <index>]

[-backup [<lport> <vpi> <vci>]]

To add multiple PVCCs with the same traffic profile, type the range command in the 
following format then press 

.

range <#pvcs> <cport> <lslot> <lvpi> <lvci>

[-mode (vcmux|llc)] [-admin (up|down)] [txtraf <index>]

[-rxtraf <index>] [-y]

<#pvcs>

The number of PVCCs you want to create with the same traffic profile. See the table on 

 to verify that the ports you plan to use for the PVCCs support the number of 

PVCCs you intend to create.

<cport>

The channel card slot number or slot and port number for the PVCC. To map the PVCC to 
a specific service type on a specific port, specify slot.port. Otherwise, use the format slot.