ADC SWD4573I1 Manuale Utente

You can restore Avidia system files by downloading the files from a TFTP server. Prior to 
downloading system files, it is recommended that you create a backup copy of your existing 
image file (if it is valid), using an .alt file name extension. See 

 for 

instructions. Be sure to download a complete set of system files to prevent version conflicts 
between files.

Make sure the system from which you want to download files is running as a TFTP server.

From the 

::admin=>

 prompt, type the download command in the following format then 

press .

download <remote host>:<full path to remote

file> <slot> [<file name>]

The system downloads the file and, if it is an image file, temporarily renames the file name 
extension to .new until the file is booted and verified.

Reset the card to which you downloaded the file(s) to load the new file(s) (unless you only 
downloaded the cli.tcl file). See 

 for instructions.

The system attempts to boot the image file that has the .new file name extension. If the 
image file is valid, the system renames the file name extension to .bin and overwrites the 
previous image file. If the new image file is not valid, the system attempts to boot the image 
file that has the .bin file name extension. If that image file is not valid, the system boots the 
backup copy of the image file that has an. alt file name extension (if you created one). If 
the system cannot find a valid image file it loads the boot monitor, from which you can 
download a new image file, and the management card fault LED lights.

<remote host>

The IP address of the computer from which you want to download the file.

<full path to remote file>

The complete system path and filename of the file you want to download, using a forward 
slash (/) to indicate a directory.