ADC SWD4573I1 Manuale Utente

Using the Avidia Web interface requires:

a PC running Windows 95, Windows 98 or Windows NT, or a Solaris workstation

an Ethernet card installed in one of the expansion slots

Netscape

®

 Version 4.5 or newer (recommended) or Internet Explorer

®

 Version 4.0 or 

newer 

an Ethernet cable

(straight-through if connecting the computer to a hub, cross-over if 

connecting the computer directly to the Avidia system); see your Hardware Installation 
Manual for cabling pinouts.

To access the Web interface:

Select one of the following methods of accessing the Web interface, then follow the 
instructions to complete setup:

Connect locally, using a PC connected to the Avidia system Fast Ethernet port. 
Connect one end of an Ethernet cable to the PC Ethernet port and the other end of the 
cable to the Fast Ethernet port on the back of the Avidia chassis. Refer to your system 
Hardware Installation Manual to locate the Fast Ethernet port on the back of the Avidia 
chassis.

Connect remotely, using a PC on the same network.

If you have not already done so, plug the PC into a wall outlet then turn on the PC and 
monitor.

Check the Ethernet card or adapter to make sure the link light is on, which confirms that 
the Ethernet link is up.