ADC SWD4573I1 Manuale Utente

Click 

 and 

 if necessary to view the entire 

. 

 displays the beginning of 

the table. 

 displays the next page of the table. Click 

 to update the 

data. 

The 

window displays the following information:

In the

 box, type the IP address of the routing entry.

In the 

 box, type the IP address of the next router in the network to which the packet 

is to be forwarded.

In the 

 box, type the number of hops the packet is allowed to make to get to its 

destination.

Click

 to activate the settings. 

Destination IP

The IP address of the routing entry.

Subnet Mask

The subnet mask used to specify what portion of the IP address is 
considered when determining whether to route the packet based on 
the data in this table row.

Next Hop

The IP address of the next router in the network to which the packet is 
to be forwarded.

Port

An index number assigned by the system to the interface over which 
the packet is routed. The management card Ethernet port always has 
an index of 1. The number 2 indicates a loopback. The system assigns 
numbers to other interfaces, such as line and channel card interfaces.

Hop Count

The number of hops the packet is allowed to make to get to its 
destination. This value is used by the RIP. If the packet makes the 
maximum allowable hopes and is not yet at its destination, it is deleted.

Type

The type of routing connection. Options:

Indirect (requires multiple hops)

Direct (local connection)

Invalid (the route is invalid)

Other (none of the above options)

Protocol

The method by which the data in the IP Routing Table entry was 
learned, either Local (manually configured) or RIP (learned 
dynamically).

Age (sec)

The number of seconds the IP Routing Table entry has been in the 
table. Learned routing entries are automatically deleted once their Age 
exceeds the maximum, which is determined by the routing protocol. 
Static routes must be deleted manually.