ADC SWD4573I1 Manuale Utente

Pagina di 658
 
Chapter 24: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual
501
Modifying System Bridging Parameters
In the 
System Bridging Configuration
 window:
1
Use the 
WAN Broadcast
 box to 
Enable
 or 
Disable
 the broadcasting of unknown WAN frames 
to all WAN logical interfaces.
2
Use the 
Bridging
 box to 
Enable
 or 
Disable
 bridging for the system.
3
In the 
Aging Time Interval
 box, type the interval, in seconds, after which Bridging Table 
entries are deleted if they are not relearned. The valid rate is 10 - 1000000. The default is 
300 seconds.
4
Use the 
Spanning Tree Protocol
 box to 
Enable
 or 
Disable
 STP for the system.
5
Do one of the following:
To activate the settings and close the 
System Bridging Configuration 
window, click 
Set
.
To cancel the settings and close the 
System Bridging Configuration
 window, click 
Close
.