Cisco Systems Cisco MGX 8850 Manuale Utente

5-39

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 5

PNNI Commands

cnfpnni-scope-map

Configure PNNI Scope Map Table

—specify the table that maps the UNI 4.0 values to the PNNI hierarchy levels.

The cnfpnni-scope-map command specifies how UNI 4.0 address scope values are mapped to PNNI
hierarchal levels. These parameters are stored in the scope map table.

Note

This function requires support of UNI 4.0 and therefore is not supported in this release.

Cards on Which This Command Runs

PXM45

Syntax

cnfpnni-scope-map <scope> <level>

Syntax Description

Related Commands

dsppnni-scope-map

scope

Specify the UNI 4.0 address scope.

Range: 1–15, where:

1 = LocalNetwork
2 = LocalNetworkPlusOne
3 = LocalNetworkPlusTwo
4 = SiteMinusOne
5 = IntraSite
6 = SitePlusOne
7 = OrganizationMinusOne
8 = IntraOrganization
9 = OrganizationPlusOne
10 = CommunityMinusOne
11 = IntraCommunity
12 = CommunityPlusOne
13 = Regional
14 = InterRegional
15 = Global
Default: none

level

Specify the PNNI level to which the UNI 4.0 address scope is mapped.

Range: 1–104
Default: 56