Cisco Systems Cisco MGX 8850 Manuale Utente
5-71
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5
PNNI Commands
dsppnni-link-selection
dsppnni-link-selection
Display PNNI Link Selection
—display the PNNI link setting, physical port identifier, and logical port identifier.
The dsppnni-link-selection command displays the link selection and both the physical and logical
identifiers for that link. Refer to the description of cnfpnni-link-selection for information about the
criteria PNNI uses to choose between two parallel links.
identifiers for that link. Refer to the description of cnfpnni-link-selection for information about the
criteria PNNI uses to choose between two parallel links.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-link-selection <portid>
Syntax Description
Display Contents
The display shows the following information for each node.
Related Commands
dsppnni-link
Attributes
portid
The PNNI physical port identifier. portid is entered and displayed as a 32-bit
string formatted as [shelf.]slot[:subslot].port[:subport]. For more details, see
string formatted as [shelf.]slot[:subslot].port[:subport]. For more details, see
physical port id
.
link selection
The ASCII string displaying the link routing policy.
logical port id
The PNNI port identifier in the form of a logical number.
Range: 1–2147483648
Log: nolog
State: active, standby
Privilege: ANYUSER