Cisco Systems Cisco MGX 8850 Manuale Utente
5-73
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5
PNNI Commands
dsppnni-mtu
dsppnni-mtu
Display PNNI Maximum Transfer Unit
—display maximum supported size of the PNNI data packet.
The dsppnni-mtu command displays the maximum PNNI packet size in number of bytes. This
command is primarily for configuring internetwork compatibility, but you can use it in lab trials to test
the affect of various packet sizes on the performance of the peer group.
command is primarily for configuring internetwork compatibility, but you can use it in lab trials to test
the affect of various packet sizes on the performance of the peer group.
Use cnfpnni-mtu to specify the PNNI packet size configuration.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-mtu
Display Contents
The following parameters are displayed for each node. The right column shows the label for each value
that appears in the dsppnni-mtu command. The left column maps each value to the corresponding
keyword in the cnfpnni-mtu command, and explains the argument function.
that appears in the dsppnni-mtu command. The left column maps each value to the corresponding
keyword in the cnfpnni-mtu command, and explains the argument function.
Related Commands
dsppnni-idb, cnfpnni-mtu
Attributes
Example
Displays the maximum packet size.
SanJose.7.PXM.a > cnfpnni-mtu 3002
SanJose.7.PXM.a > dsppnni-mtu
max packet size : 3002
SanJose.7.PXM.a >
max packet size
The value of the max transmit unit mtu in number of bytes.
Range: 1024–8192
Log: nolog
State: active, standby
Privilege: ANYUSER