Cisco Systems Cisco MGX 8850 Manuale Utente
6-79
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6
Logical Node, Port, and Signaling Commands
dsppncon
dsppncon
Display Connection—display information about an active SVC or SPVC.
The information that dsppncon displays corresponds to the objects described in the portCallTable and
portAbrCallTable MIBs. This command can be issued at any node in the route. Refer to the example
for the contents of the command output.
portAbrCallTable MIBs. This command can be issued at any node in the route. Refer to the example
for the contents of the command output.
Cards on Which This Command Runs
PXM45
Syntax
dsppncon <portid> <vpi> <vci>
Syntax Description
Related Commands
dsppncons
Attributes
portid
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also
See also
vpi
VPI for the call.
Default: 0
vci
VCI for the call. If you do not specify a VCI, the connection is a virtual path connection.
Default: 0
Log: nolog
State: active, standby
Privilege: ANYUSER