Cisco Systems Cisco MGX 8850 Manuale Utente
6-81
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6
Logical Node, Port, and Signaling Commands
dsppncons
dsppncons
Display Port Connections
Displays a summary of SVCs and SPVCs on one port or all ports. The default is all connections on all
ports because all parameters are optional. You can specify a starting VPI or VCI to begin a range of
connections. In addition, you can display one of two types: point-to-point or point-to-multipoint.
ports because all parameters are optional. You can specify a starting VPI or VCI to begin a range of
connections. In addition, you can display one of two types: point-to-point or point-to-multipoint.
Cards on Which This Command Runs
PXM45
Syntax
dsppncons
[-port
portid]
[-vpi starting-vpi]
[-vci starting-vci]
[-type {p2p | p2mp}]
Syntax Description
Related Commands
dsppncon
Attributes
-port
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also
See also
-vpi Starting
VPI.
-vci Starting
VCI.
-type
Causes the system to display only point-to-point or point-to-multipoint. Without this
option, the system displays both types. No default value exists if you include the keyword
type on the command line, you must enter one of the possible entries.
option, the system displays both types. No default value exists if you include the keyword
type on the command line, you must enter one of the possible entries.
•
“p2p” for point-to-point
•
“p2mp” for point-to-multipoint
Log: nolog
State: active, standby
Privilege: ANYUSER