Cisco Systems Cisco MGX 8850 Manuale Utente
6-116
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6
Logical Node, Port, and Signaling Commands
tstpndelay
tstpndelay
Test Port Delay
Initiates loopback test for a connection. If you provide both a VPI and VCI, the segment endpoint is an
F5 flow endpoint (for VCCs). If you provide only a VPI, the segment endpoint is a F4 flow endpoint (for
VPCs). This command displays the round trip delay in microseconds.
F5 flow endpoint (for VCCs). If you provide only a VPI, the segment endpoint is a F4 flow endpoint (for
VPCs). This command displays the round trip delay in microseconds.
Use cnfconsegep to specify the segment endpoint if one does not already exist.
Cards on Which This Command Runs
PXM45
Syntax
tstpndelay <portid> <vpi> [vci]
[-direction {inbound | outbound}]
Syntax Description
Related Commands
cnfconsegep
Attributes
portid
The portid is the PNNI physical port. The format is
[shelf.]slot[:subslot].port[:subport]. See also
[shelf.]slot[:subslot].port[:subport]. See also
vpi
VPI of the connection.
vci
VCI of the connection.
Default: 0
-direction
Specifies the direction of loopback.
inbound: endpoint towards the backplane
outbound: endpoint departing the port
Default: inbound
Log: log
State: active
Privilege: SUPER_GP