Cisco Systems Cisco MGX 8850 Manuale Utente
6-117
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6
Logical Node, Port, and Signaling Commands
uppnport
uppnport
Up PNNI Port:
The uppnport command lets you put a UNI or NNI port into service (administratively “up” the port).
The circumstances in which you would use the uppnport command are as follows:
The circumstances in which you would use the uppnport command are as follows:
•
After you have downed the port for any reason by using the dnpnport command
•
After you have pre-configured a port by using the addpnport command (see taddpnport
description)
description)
Cards on Which This Command Runs
PXM45
Syntax
uppnport <portid>
Syntax Description
Related Commands
addpnport, delpnport, dnpnport, dsppnport, dsppnports
Attributes
portid
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also
See also
Log: log
State: active
Privilege: GROUP1