Cisco Systems Cisco MGX 8850 Manuale Utente
7-30
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7
SPVC and SVC Commands
cnfoamsegep
cnfoamsegep
Configure OAM Segment Endpoint
Define the port as a segment endpoint for F4 and F5 operations administration and maintenance (OAM)
cells. This command does not take effective for existing connections, and only does for newly
established calls. This command can be used regardless of the state of the port.
cells. This command does not take effective for existing connections, and only does for newly
established calls. This command can be used regardless of the state of the port.
Command(s) on Which Command Executes
PXM45
Syntax
cnfoamsegep <portid>
[{yes | no}]
Syntax Description
Related Commands
dspoamsegep, cnfconsegep, delconsegep
Attributes
portid
The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
[shelf.]slot[:subslot].port[:subport]. See also
yes
The port is configured as a segment endpoint and is a segment endpoint for all
connections on this port.
connections on this port.
no
The port is not a segment endpoint.
Default = no
Log: log
State: active
Privilege: GROUP1