Cisco Systems Cisco MGX 8850 Manuale Utente
7-32
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7
SPVC and SVC Commands
delcons
delcons
Delete Connections
Delete a range of ATM connections.
Caution
Before entering this command, you need to know exactly how many connections you need to delete.
This command starts deleting connection endpoints in lexicographic order (dspcons displays in the
same order). Incorrect usage of this command could result in deletion of more endpoints than
necessary, and repairing such damage could be very costly.
This command starts deleting connection endpoints in lexicographic order (dspcons displays in the
same order). Incorrect usage of this command could result in deletion of more endpoints than
necessary, and repairing such damage could be very costly.
Cards on Which This Command Runs
AXSM
Syntax
delcons <ifNum> <vpi> <vci>
[-num <num. conns to del>]
[-verbose < 1 | 0 >]
Syntax Description
Related Commands
None
Attributes
ifNum
The logical port number. The range for AXSM is 1–60.
vpi
For a UNI, the range is 0–255. For an NNI, the range is 0–4095.
vci
For a VCC, the range is 32–65535. For a VPC, the only value is 0.
-num
(Optional) Keyword that specifies the number of connections to delete.
-verbose
(Optional) Keyword that enables (1) or disables (0) verbose mode. In verbose mode,
the screen displays the connection identifier of each connection immediately after it
is deleted.
the screen displays the connection identifier of each connection immediately after it
is deleted.
Log: no log
State: active
Privilege: SERVICE_GP