Cisco Systems Cisco MGX 8850 Manuale Utente
7-33
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7
SPVC and SVC Commands
delconsegep
delconsegep
Delete Connection Segment Endpoint
Deletes a segment endpoint on a connection. When both VPI and VCI are present, the segment endpoint
is an F5 flow endpoint (for VCCs). When the optional VCI is not present, the segment endpoint is an F4
flow endpoint (for VPCs).
is an F5 flow endpoint (for VCCs). When the optional VCI is not present, the segment endpoint is an F4
flow endpoint (for VPCs).
Note
The delconsegep command works for SVCs only.
Cards on Which This Command Runs
PXM45
Syntax
delconsegep <portid>
vpi
[vci]
Syntax Description
Related Commands
cnfoamsegep, dspoamsegep, cnfconsegep, dspconsegep
Attributes
portid
The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
[shelf.]slot[:subslot].port[:subport]. See also
vpi
VPI of the connection.
vci
VCI of the connection.
Log: log
State: active
Privilege: GROUP1