Cisco Systems Cisco MGX 8850 Manuale Utente
9-47
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9
Troubleshooting Commands
dellnloop
dellnloop
Delete Line Loop
Remove the line loopback state from a line.
Cards on Which This Command Runs
AXSM
AXSM Syntax
dellnloop <-ds3 | -sonet> <bay.line>
Note
For AXSM cards, the keyword ds3 applies to both T3 and E3 line types.
Syntax Description
Related Commands
addlnloop
Attributes
Example
Deleting a DS3 loopback line.
MGX8850.1.11.AXSN.a > dellnloop -ds3 1.6 -lpb 3
Line loop-back status will be changed.
Do you want to proceed (Yes/No) ?
-ds3 | -sonet bay.line
Specifies a SONET line (OC-3c, OC-12c, OC-48c) or a DS3 line (E3 or T3),
the bay (1 for upper or 2 for lower), and the line number. The line number
ranges from 1 to the highest number line on the back card.
the bay (1 for upper or 2 for lower), and the line number. The line number
ranges from 1 to the highest number line on the back card.
Log: log
State: active
Privilege: GROUP1