Cisco Systems Cisco MGX 8850 Manuale Utente
9-49
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9
Troubleshooting Commands
dnln
dnln
Down Line
Use dnln to de-activate a line on the current card. Before you can de-activate a line, you must:
Step 1
Remove connections. Use delcon or delcons.
Step 2
Remove any resource partitions. Use dsprscprtn to see existing partitions and delrscprtn to remove
partitions.
partitions.
Step 3
Remove all logical ports. Use dspports to see existing logical ports on the line and delport to remove
logical ports.
logical ports.
Cards on Which This Command Runs
AXSM
Syntax
dnln <bay.line>
Syntax Description
Related Commands
dspln, dsplns, cnfln, upln
Attributes
Example
De-activate line 1 in bay 1.
MGX8850.1.AXSM.a > dnln 1.1
bay.line
Specifies a SONET line (OC-3c, OC-12c, OC-48c) or a DS3 line (E3 or T3), the bay
(1 for upper or 2 for lower), and the line number. The line number ranges from 1 to
the highest number line on the back card.
(1 for upper or 2 for lower), and the line number. The line number ranges from 1 to
the highest number line on the back card.
Log: log
State: active
Privilege: GROUP1