Cisco Systems Cisco MGX 8850 Manuale Utente
9-51
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9
Troubleshooting Commands
dspalm
dspalm
Display Alarm—displays the alarms from among the configured alarm types for a line.
Use the dspalm command to view the alarms associated with a specified line. See cnfalm for a
description of the types of alarms you can see. In addition to the configurable alarm types, the output
also shows instances of loss of cell delineation (LOCD).
description of the types of alarms you can see. In addition to the configurable alarm types, the output
also shows instances of loss of cell delineation (LOCD).
Cards on Which This Command Runs
AXSM
AXSM Syntax
dspalm -ds3|-e3|-sonet|-ds1|-e1 <bay.Line>
Syntax Description
Related Commands
cnfalm, clralm, dspalms, dspalmcnt
Attributes
-ds3 | -e3 | -sonet
-ds1 | -e1
-ds1 | -e1
Specifies a SONET line (OC-3c, OC-12c, OC-48c), DS3 line, E3
line. or DS1 line.
line. or DS1 line.
<bay>
The bay (1 for upper or 2 for lower), and the line number. The line
number ranges from 1 to the highest number line on the back card.
number ranges from 1 to the highest number line on the back card.
<line>
Line number:
•
For OC12: 1
•
For OC3: 1–4
•
T3, E3: 1–8
Log: no log
State: active, standby
Privilege: ANYUSER