Cisco Systems Cisco MGX 8850 Manuale Utente
2-15
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 2
Shelf Management Commands
clidbxlevel
clidbxlevel
Command Line Interface Level—modify the contents of the CLI help output.
The clidbxlevel command lets you display the attributes for a command. You must execute clidbxlevel
on each card where you want to change the level of displayed information. For example, if you execute
clidbxlevel on an AXSM in slot 2 and want to see the same level of information in slot 8, you must
execute clidbxlevel on the CLI in slot 8 and make the appropriate change. The attributes consist of:
on each card where you want to change the level of displayed information. For example, if you execute
clidbxlevel on an AXSM in slot 2 and want to see the same level of information in slot 8, you must
execute clidbxlevel on the CLI in slot 8 and make the appropriate change. The attributes consist of:
•
The required card state for execution
•
The minimum user-privilege for the command
•
Whether an incident of command execution appears in a log file
Cards on Which This Command Runs
PXM45
Syntax
clidbxlevel [level]
Syntax Description
Related Commands
None
Attributes
Example
Specify level 1 for the CLI. Obtain attributes for all “user” commands.
pop20one.7.PXM.a > clidbxlevel 1
Value of cliDbxLevel is now 1
pop20one.7.PXM.a > ? user
Command Access Card Log
---------------------------------------------------
adduser GROUP1 A +
cnfuser GROUP1 A -
deluser GROUP1 A +
dspusers ANYUSER A|S -
users ANYUSER A|S -
level
The level is either 0–3. If you do not include a level, the system states the current level.
Log: no log
State: active, standby, init
Privilege: SERVICE_GP