Cisco Systems Cisco MGX 8850 Manuale Utente
2-16
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 2
Shelf Management Commands
clrallcnf
clrallcnf
Clear All Configurations
Deletes the configuration of all the cards in the switch. After clrallcnf, you need to reconfigure the
switch. (See setrev.)
switch. (See setrev.)
The clrallcnf command clears all configuration information except for the boot IP address (see
bootchange) and the time of day.
bootchange) and the time of day.
Caution
Be absolutely sure you need to execute clrallcnf because it clears all configuration files on the
PXM45. After you enter clrallcnf, the system prompts you to confirm the action.
PXM45. After you enter clrallcnf, the system prompts you to confirm the action.
Cards on Which This Command Runs
PXM45
Syntax
clrallcnf
Related Commands
None
Attributes
Example
Clear all the configuration elements for all the cards in the node. The system prompts for confirmation.
node1.7.PXM.a > clrallcnf
All SM's config will be deleted, and
the shelf will be reset.
Do you want to proceed (Yes/No)?
Log: no log
State: active, init
Privilege: SERVICE_GP