Cisco Systems Cisco MGX 8850 Manuale Utente
9-158
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9
Troubleshooting Commands
upcon
upcon
Up Connection—return a downed connection to the active (administratively up) state.
Activate a connection that was previously brought down by the dncon command. (The typical purpose
of dncon is some form of operational modification or troubleshooting.) Execute upcon at the master end
of the connection.
of dncon is some form of operational modification or troubleshooting.) Execute upcon at the master end
of the connection.
Cards on Which This Command Runs
AXSM
Syntax
upcon <ifNum > <vpi> <vci>
Syntax Description
Related Commands
dncon
Attributes
ifNum
The logical port number. The range for AXSM is 1–60.
vpi
Virtual path identifier. On the AXSM, the range is 1–255.
vci
Virtual connection identifier. On t he AXSM, the range is 32–65535 for a VCC. For
a VPC, the only vci is 0.
a VPC, the only vci is 0.
Log: log
State: active
Privilege: GROUP1