Cisco Systems Cisco MGX 8850 Manuale Utente
9-159
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9
Troubleshooting Commands
upln
upln
Up Line
Activates a line on the current card. After you have activated the line, use cnfln to configure the line
characteristics such as the type of line (for SONET types, T3, or E3), line signaling, and so on.
characteristics such as the type of line (for SONET types, T3, or E3), line signaling, and so on.
Note
See description of cnfcdsct for important planning considerations before you use upln.
Cards on Which This Command Runs
AXSM
Syntax
upln <bay.line>
Syntax Description
Related Commands
dspln, dsplns, cnfln, dnln
Attributes
Example
Activate line 1 in bay 1.
MGX8850.1.AXSM.a > upln 1.1
bay.line
Identifies the bay (1 or 2) and the number of the line. The line number can be 1 to the
highest numbered line on the back card.
highest numbered line on the back card.
Log: log
State: active
Privilege: GROUP1