D-Link DGS-1224T Manuale Utente
3
Mount the Switch in the rack
Connecting Network Cable
The DGS-1224T supports 10/100/1000Mbps Gigabit Ethernet. It runs
full/half duplex transfer mode for 10/100Mbps and full duplex transfer
mode for 1000Mbps. Each port on the DGS-1224T supports Auto-
MDI/MDI-X. Auto-MDI/MDI-X is a feature that eliminates the need for
worrying about using either a standard or crossover cable— you can
use either one— and allows any port to be an uplink port.
AC Power
The DGS-1224T can be used with AC power supply 100~240V AC,
50~60Hz. The power switch is located at the rear of the unit adjacent to
the AC power connector and the system fan. The switch’s power supply
will adjust to the local power source automatically and may be turned on
without having any or all LAN segment cables connected.
The DGS-1224T supports 10/100/1000Mbps Gigabit Ethernet. It runs
full/half duplex transfer mode for 10/100Mbps and full duplex transfer
mode for 1000Mbps. Each port on the DGS-1224T supports Auto-
MDI/MDI-X. Auto-MDI/MDI-X is a feature that eliminates the need for
worrying about using either a standard or crossover cable— you can
use either one— and allows any port to be an uplink port.
AC Power
The DGS-1224T can be used with AC power supply 100~240V AC,
50~60Hz. The power switch is located at the rear of the unit adjacent to
the AC power connector and the system fan. The switch’s power supply
will adjust to the local power source automatically and may be turned on
without having any or all LAN segment cables connected.
Connect The DGS-1224T Gigabit Smart
Switch To Your Network
Switch To Your Network
Front Panel
10/100/1000 Base-T Mini GBIC Ports
Twisted-Pair Ports
┌───────────────┐ ┌──┐
└─────┘
LED Indicators