Q-Logic SANBOX2-64 Manuale Utente
6 – Removal/Replacement
Fans
59043-01 A
6-19
6.6.2
Installing a Fan
To install a fan, do the following:
1.
Confirm that the new fan has the same air flow direction as the old fan. Each
fan has a label indicating the air flow direction.
fan has a label indicating the air flow direction.
2.
Slide the fan into the bay until it is firmly seated and fasten the screws. A fan
will fit in any bay.
will fit in any bay.
3.
Confirm the fan status. Do one of the following:
■
Open a Telnet session and enter the Show Chassis command to
display the operational status of the fans. Refer to the
display the operational status of the fans. Refer to the
.
■
Observe the fan status in the Switch data window of the SANbox
Manager topology display. Refer to the SANbox2-64 Switch
Management User’s Guide.
Manager topology display. Refer to the SANbox2-64 Switch
Management User’s Guide.