Enterasys Networks 6000 Manuale Utente

Managing the Module

2-91

The Device View

Displays a port’s Acceptable Frame Types setting: admitAll (the port accepts both tagged 
and untagged frames), admitOnlyVlanTagged (the port accepts only tagged frames) or No 
Capability (the port does not support this functionality).

Displays whether the port is performing Ingress Filtering. Ports performing Ingress 
Filtering will discard any frame received whose VLAN classification is not on the port’s 
egress list.

Displays whether GVRP (GARP VLAN Registration Protocol) is currently enabled or 
disabled on the port. GVRP is a protocol used to dynamically add VLANs to port egress 
lists across a domain. Ports that do not support this functionality will display N/A.

Displays the total number of failed GVRP registrations for all VLANs on the port. Ports 
that do not support this functionality will display N/A.

Displays the source MAC Address of the last GVRP message (PDU, Protocol Data Unit) 
received on the port. Ports that do not support this functionality will display N/A.

To assign a port to any configured VLAN:

1.

In the table, click to select a port that you wish to assign to a VLAN. The port’s 
current VLAN configuration information, including its VLAN ID, will be 
displayed in the fields below.

2.

In the VLAN ID field, click to select the VLAN ID of the VLAN to which you 
wish to assign the selected port.

3.

Click the Apply button. The new VLAN assignment will be reflected in the 
VLAN Port Configuration (Advanced) window’s table.