Enterasys Networks 6000 Manuale Utente
Managing the Module
2-93
The Device View
Configuring GVRP
To enable or disable GVRP (GARP VLAN Registration Protocol) on a port:
1.
Select the desired port in the table:
2.
Use the GVRP drop-down list to specify whether GVRP will be enabled on the
port. GVRP is a protocol used to dynamically add VLANs to port egress lists
across a domain. If the device does not support GVRP, this field will be
grayed out.
port. GVRP is a protocol used to dynamically add VLANs to port egress lists
across a domain. If the device does not support GVRP, this field will be
grayed out.
3.
Click the Apply button. The new state will be reflected in the VLAN Port
Configuration (Advanced) window’s table.
Configuration (Advanced) window’s table.
Updating VLAN Port Configuration Information
Clicking the Refresh button will update the information displayed in the Port
Configuration table without closing the window.
Configuration table without closing the window.
Performing Egress List Configuration
Ports can transmit traffic for any or all defined VLANs on your network as long as the
VLANs are on the port’s egress list. Use the VLAN Egress Port Configuration window to
determine which VLANs are on each port’s egress list. To launch the window:
VLANs are on the port’s egress list. Use the VLAN Egress Port Configuration window to
determine which VLANs are on each port’s egress list. To launch the window:
1.
In the Device View, select Bridge Extension Configuration... from the Device
menu.
menu.
2.
In the Bridge Extension Configuration window, click on the VLAN button and
select VLAN Egress Port Configuration... from the menu. The VLAN Egress
Port Config window,
select VLAN Egress Port Configuration... from the menu. The VLAN Egress
Port Config window,
, appears: