Extreme networks 17001 Manuale Utente
Summit Family Switches Hardware Installation Guide
149
Figure 123: Removing the Switch from a Four-Post Rack
5
Set the switch on a secure work surface. Using a #1 Phillips screwdriver, remove the front mounting
brackets from the sides of the switch.
brackets from the sides of the switch.
6
Remove the rear mounting brackets from the rear rack posts.
Installing a Summit X650 Series Switch
The Summit X650 series switch fits into a standard 19-inch equipment rack. The provided
rack-mounting brackets are adaptable to either two-post or four-post (cabinet) mounting.
rack-mounting brackets are adaptable to either two-post or four-post (cabinet) mounting.
The installation process includes the following tasks:
1
Install the switch in the rack.
2
Install one or two power supplies and connect power cables.
3
Connect network interface cables.
If you are installing Summit X650 series switches for use in a SummitStack configuration, read
before you install the switches.
SH_148