Extreme networks 17001 Manuale Utente
Installing Summit Family Switches
Summit Family Switches Hardware Installation Guide
148
Figure 122: Removing a Front-Mounted Switch from a Two-Post Rack
Removing a Switch from a Four-Post Rack
Removing the Summit X650 switch from a cabinet or rack requires two people to maneuver the switch
and disconnect the mounting hardware.
and disconnect the mounting hardware.
To remove the Summit X650 series switch from a cabinet or four-post rack:
1
Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate
ground point on the rack.
ground point on the rack.
2
Verify that all power supplies have been removed from the switch.
3
Support the front of the switch while you remove the front rack mounting screws (
4
Carefully slide the switch forward out of the cabinet and off the rear mounting brackets.
SH_130