LevelOne KVM-0407 Manuale Utente

 - 

15 - 

* Auto-Switch Function: 

When you enable the AutoSwitch mode will cause KVM-0407 to switch the HUB 

with the host together when you switch the host, that means host and HUB will 

switch together, it could be by hotkey, push button. This is convenient for you to 

let the USB device always follow the host.   

 

There are two ways to turn the HUB Auto-Switch mode ON : 

A). By hot key [Scroll+Scroll][H] : please be reference the hotkey table in page 

14. 

B). Press any host push button continually for 2 seconds when the Auto-Switch 

mode is OFF. ( The Auto-Switch LED will be ON ).     

 

You must switch the hub to the new target host by hotkey. 

 

There are two ways to turn the HUB Auto-Switch mode OFF : 

A). By hot key [Scroll+Scroll][H] : please reference the hotkey table in page 14. 

B). Press any host push button continually for 2 seconds when the Auto-Switch 

mode in ON. ( The AutoSwitch LED will be OFF).. 

* Auto-Scan Function: 

When you press the Auto-Scan button, KVM-0407 switches cycles through all the 

ports and displays them on the monitor. Each port is displayed for 5,10,15,20 

seconds before switching to the next. You can press the normal numeric key 

1,2,3,4 to adjust the interval time(Please reference the hotkey table in page 14). If 

you press the Auto-Scan button again, the monitor screen will jump back to the 

port that it was started. 

 

Note:  

The mouse and keyboard will have no effect in this mode. This is necessary to 

prevent errors such as erratic movement and wrong characters to display when 

using the mouse or keyboard in accident.