Lucent Technologies P332MF Manuale Utente
Cajun P332MF User’s Guide
111
Laser Classification
Note: Class 1 lasers are inherently safe under reasonably foreseeable conditions of
operation.
operation.
Caution: The use of optical instruments with this product will increase eye hazard.
Usage Restriction
When a GBIC transceiver is inserted into the X330G2 Expansion sub-module but is
not in use, then the Tx and Rx ports should be protected with an optical connector
or a dust plug.
not in use, then the Tx and Rx ports should be protected with an optical connector
or a dust plug.
Lucent Approved GBIC Transceivers
Caution: All Lucent approved GBICs are 5V. Do not insert a 3.3V GBIC.
Lucent supplies the following two GBIC transceivers for the Cajun P330 X330G2
Expansion Sub-modules. You can order these directly from your local Lucent
representative using the PEC or COM Codes:
Expansion Sub-modules. You can order these directly from your local Lucent
representative using the PEC or COM Codes:
In addition, Lucent has tested and approved a number of GBIC transceivers from
other manufacturers for use with the Cajun X330G2 Expansion sub-module. An
up-to-date list can be found in in Lucent Networks’ World-Wide Web site at the
following address:
other manufacturers for use with the Cajun X330G2 Expansion sub-module. An
up-to-date list can be found in in Lucent Networks’ World-Wide Web site at the
following address:
http://www.lucentnetworks.com/
Click on the “Supported Devices” icon.
Type
Description
PEC Code
COM Code
GBIC SX
Transceiver
Transceiver
Multimode Fiber
1000BaseSx (550 m)
1000BaseSx (550 m)
4705-122
108659228
GBIC LX
Transceiver
Transceiver
Single-mode Fiber
1000BaseLx (10 km)
1000BaseLx (10 km)
4705-121
108659210
CLASS 1
LASER PRODUCT