Lucent Technologies P332MF Manuale Utente
Chapter 6
Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide
41
Show time Command
Use the
show time command to display the current stack time.
The syntax for this command is:
show time
show time
Example:
Cajun_P330-N> show time
10:32:34 27 JAN 2000 GMT
Cajun_P330-N> show time
10:32:34 27 JAN 2000 GMT
Show timezone Command
Use the
show timezone command to display the current stack timezone.
The syntax for this command is:
show timezone
show timezone
Example:
Cajun_P330-N> show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
Cajun_P330-N> show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
Show ntp Command
Use the
show ntp command to display the address of the Network Time Protocol
(NTP) server in addition to other time related status information.
The syntax for this command is:
show ntp
show ntp
• show intelligent
multicast
Shows the status IP multicast filtering
application
application
Page 58
• show intelligent
multicast
hardware support
hardware support
Shows whether the connected unit’s
hardware supports IP multicast filtering
hardware supports IP multicast filtering
Page 58
• show secure mac
Shows the secure MAC addresses of a
port
port
Page 59
• show security
mode
Displays the status of the MAC security
feature (enabled/disabled)
feature (enabled/disabled)
Page 59
• show port
security
Lists the security mode of the ports of a
module or stack.
module or stack.
Page 59