Manualsbrain.com
  1. Manuali
  2. Marche
  3. Lucent Technologies
  4. P332MF
  5. Manuale Utente

Lucent Technologies P332MF Manuale Utente

Scarica
Pagina di 134
Chapter 6
Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide
39
Clear screen Command
The clear screen command clears the current terminal display.
The syntax for this command is:
clear screen
Ping Command
Use the
 ping command to send ICMP echo request packets to another node on 
the network.
The syntax for this command is:
ping [host[number]]
Note:  You can use this command via the Master module only.
Example:
To ping the IP number 149.49.48.1 ten times:
Cajun_P330-N> ping 149.49.48.1 10
ping 149.49.48.1 10: 56 databytes
64 bytes from 149.49.48.1: icmp_seq=0. time=8 ms
Show Commands Summary Table
Following is a table of the
 show commands: 
host
Host IP address/Internet address of route destination. If missing then 
the last host IP is used.
number
Number of packets to send. If missing then the last number is used
• show time
Show current time
Page 41
• show timezone
Show the current timezone offset
Page 41
• show ntp
Display the current Network Time 
Protocol (NTP) status and parameters
Page 41
• show ip route
Show IP routing table entries
Page 42
• show image 
version
Show the image version
Page 42
• show snmp
Show SNMP community strings
Page 43
• show snmp retries
Show SNMP retries number
Page 43
• show snmp timeout
Show SNMP timeout
Page 43