Allied Telesis AT-IFS802SPOE Manuale Utente
24
AT-IFS802SP/POE(W)-80 User Manual
5.3 Login in the Console Interface
When the connection between Switch and PC is ready, turn on the PC and run a terminal emulation
program or Hyper Terminal and configure its communication parameters to match the following
default characteristics of the console port:
program or Hyper Terminal and configure its communication parameters to match the following
default characteristics of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
Having finished the parameter settings, click ‘OK’. When the blank screen shows up, press Enter key
to have the login prompt appears. Key in ‘manager’ (default value) for Username and “friend” for
Password (use Enter key to switch), then press Enter and the Main Menu of console management
appears. Please see below figure for login screen.
to have the login prompt appears. Key in ‘manager’ (default value) for Username and “friend” for
Password (use Enter key to switch), then press Enter and the Main Menu of console management
appears. Please see below figure for login screen.
5.4 CLI Management
The system supports the console management—CLI command. After you log in on to the system, you
will see a command prompt. To enter CLI management interface, type in “
will see a command prompt. To enter CLI management interface, type in “
enable” command.
The following table lists the CLI commands and description.
CLI command interface