Allied Telesis AT-IFS802SPOE Manuale Utente
25
AT-IFS802SP/POE(W)-80 User Manual
5.5 Commands Level
Modes
Access Method
Prompt
Exit Method About This Mode1
User EXEC
Begin a session with
your switch.
your switch.
switch>
Enter logout
or quit.
or quit.
The user commands available at
the user level are a subset of those
the user level are a subset of those
available at the privileged level.
Use this mode to
Use this mode to
• Perform basic tests.
• Display system information.
Privileged
EXEC
EXEC
Enter the enable
command while in
User EXEC mode.
User EXEC mode.
switch#
Enter disable
to exit.
to exit.
The privileged command is the
advanced mode.
advanced mode.
Use this mode to
• Display advanced function status
• Display advanced function status
• Save configuration
Global
Configuration
Configuration
Enter the configure
command while in
privileged EXEC
privileged EXEC
mode.
switch
(config)#
(config)#
To exit to
privileged
privileged
EXEC mode,
enter exit or
enter exit or
end
Use this mode to configure those
parameters that are going to be
applied to your switch.
applied to your switch.
VLAN
database
database
Enter the vlan
database command
while in privileged
while in privileged
EXEC mode.
switch (vlan)#
To exit to
user EXEC
mode, enter
mode, enter
exit.
Use this mode to configure VLAN-
specific parameters.
specific parameters.
Interface
configuration
Enter the interface
of fast Ethernet
command (with a
command (with a
specific interface)
while in global
configuration mode.
configuration mode.
switch
(config-if)#
To exit
to global
configuration
mode, enter
exit.
configuration
mode, enter
exit.
To exit to
privileged
EXEC mode,
EXEC mode,
enter exit or
end.
end.
TUse this mode to configure
parameters for the switch and
parameters for the switch and
Ethernet ports.