Lightwave Communications 3200 Manuale Utente

6.8.1

LINESPERPAGE

LINESPERPAGE Command

sys admin>>LINESPERPAGE
Lines per page set to 22

sys admin>LINESPERPAGE 10
Lines per page set to 10

sys admin>>

The LINESPERPAGE command allows the sys admin to change the number of lines
displayed per terminal page on the control card port before the MORE prompt is
displayed. The number of lines to display per page is entered after the command.
Entering the command without a number following will display the current amount of
lines displayed per page. The default value is 22, which will work properly with a 24-line
display.

6.8.2

TIMEOUT

TIMEOUT Command

sys admin>>TIMEOUT
Timeout set to 1 minutes

sys admin>>TIMEOUT 0
Timeout set to 0 minutes
0 disables the timeout from occurring

sys admin>>TIMEOUT 5
Timeout set to 5 minutes

sys admin>>

The TIMEOUT command allows the sys admin to define a time limit on how long an idle
sys admin terminal may remain logged in. If there is no interaction for the defined
amount of time, the control card will log out the sys admin. The time limit in minutes is
entered as a command qualifier after the command, and must be entered as a whole
number. Defining the time limit as 0 will disable this function. The default value is one
minute.

6.9

Breaking User Connections

The sys admin has four commands available to forcibly break user connections to
devices. The commands BREAK and FORCELOGOUT allow the sys admin to break any
connection on demand, while TELNETTIMEOUT and MODEMTIMEOUT automatically
break idle user sessions for the network or modem card.

6.9.1

BREAK

BREAK Command

sys admin>>BREAK 1
Break this connection? (write out YES) Yes or No: No>yes

sys admin>>