Inter-Tel CS-5200 Manuale Utente
System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Endpoint Feature Codes
Page 123
LCD Contrast Adjustment
303
(Model 8620/8622, 8660, or 8662) Adjusts the
LCD contrast on the display. The endpoint
must be idle to use this feature.
LCD contrast on the display. The endpoint
must be idle to use this feature.
Message
365
This feature code is used for leaving and
retrieving a message waiting indication at a
called endpoint or the called endpoint’s mes-
sage center. Depending on how the message
was left, the called endpoint user either
retrieves the message from his/her message
center or from the endpoint that left the mes-
sage. (Inter-Tel endpoints use the MSG but-
ton.)
retrieving a message waiting indication at a
called endpoint or the called endpoint’s mes-
sage center. Depending on how the message
was left, the called endpoint user either
retrieves the message from his/her message
center or from the endpoint that left the mes-
sage. (Inter-Tel endpoints use the MSG but-
ton.)
Message – Cancel
366
Allows the endpoint user to cancel a message
waiting indication that he or she left at another
endpoint.
waiting indication that he or she left at another
endpoint.
Message – Cancel Current
368
Cancels a message waiting indication that is
waiting at the endpoint without requiring the
user to respond to it. (Inter-Tel endpoints can
use the asterisk [*] button while viewing the
message.)
waiting at the endpoint without requiring the
user to respond to it. (Inter-Tel endpoints can
use the asterisk [*] button while viewing the
message.)
Message – Silent
367
Leaves a Message Waiting indication at a
endpoint without first placing an intercom call.
endpoint without first placing an intercom call.
Mute On/Off
314
(Not used on single line endpoints) Turns the
microphone on or off during a call. If muted,
the endpoint user can hear the other party, but
the party cannot hear the endpoint user.
(Inter-Tel endpoints can also use the MUTE
button.)
microphone on or off during a call. If muted,
the endpoint user can hear the other party, but
the party cannot hear the endpoint user.
(Inter-Tel endpoints can also use the MUTE
button.)
Page
7
When followed by a paging zone code (0–9 or
0–49), it allows announcements to be made
through endpoint speakers and any external
paging speakers in the page zone.
0–49), it allows announcements to be made
through endpoint speakers and any external
paging speakers in the page zone.
Page On/Off
325
(Not used on single line endpoints) Halts
pages through the endpoint speaker or allows
them to be received again.
pages through the endpoint speaker or allows
them to be received again.
Program Buttons
397
(Not used on single line endpoints) User-pro-
grammable feature buttons and Station Speed
Dial buttons can be programmed using this
feature code.
grammable feature buttons and Station Speed
Dial buttons can be programmed using this
feature code.
Program Endpoint Password
392
The endpoint password is used for the
Remote Programming feature. The password
can be changed by entering the Program End-
point Password feature code at the endpoint
or when using the Remote Programming fea-
ture.
Remote Programming feature. The password
can be changed by entering the Program End-
point Password feature code at the endpoint
or when using the Remote Programming fea-
ture.
Queue Request
6
Requests (or cancels) an automatic callback
when a busy trunk or endpoint becomes avail-
able.
when a busy trunk or endpoint becomes avail-
able.
Table 19.
Endpoint Feature Code Definitions(Continued)
FEATURE NAME
CODE
DEFINITION